Dragon Cams

Dragon Cams

The Dragon's striking TripleGrip cam lobes feature an increased contact area with a raw aluminium finish and additional bite points. These features work together to increase friction between the cam lobe and the rock it's placed in. This increases holding power and reduces walking, particularly in slick or soft rock types and marginal placements. Single stem, dual axle design gives Dragon cams 360° flexibility and a substantial expansion range, increasing performance in sub-optimal placements and helping you get the right piece first time. The Dragon cams hot-forged thumb press gives stable handling and reduces fumbling from gloved hands and pumped fingers. It allows the Dragon to have an extendable sling with no strength penalty, reducing the number of quickdraws needed to extend placements and minimising rack weight.


Dragon 00: 75g (weight), 10kN (strength), 9kN (passive strength), 13-21mm (range), Blue Dragon 0: 85g, 14kN, 12kN, 16-25mm, Silver Dragon 1: 103g, 14kN, 14kN, 20-33mm, Purple Dragon 2: 117g, 14kN, 14kN, 24-41mm, Green Dragon 3: 128g, 14kN, 14kN, 29-50mm, Red Dragon 4: 154g, 14kN, 14kN, 38-64mm, Yellow Dragon 5: 208g, 14kN, 14kN, 50-85mm, Blue Dragon 6: 299g, 14kN, 14kN, 68-114mm, Silver
Dragon II Cams


TripleGrip lobes are DMM’s patented cam technology designed to revolutionise friction power and supply unparalleled performance in sub-optimal placements like flared cracks or slick rock. DMM have managed to triple the resistance and grip strength of the Dragon cam: by machining a raw aluminium finish and dividing the cam’s bite points into three individual surfaces, the Dragon now has twelve areas of surface-contact rather than four, meaning it excels in slick or soft rock. In slippery situations, the Dragon cam is a friend that you can count on.
Dragon II Cams


Dual axle cams are designed to do two things: help you get the right placement first time, and make your rack lighter. A greater range of motion means you need fewer units to cover a large range of crack sizes, meaning you save on carry weight, as well as making it easier to choose the right size cam for the job first time. All DMM cams use high quality stainless steel axles that offer increased levels of corrosion resistance and high strength levels, so carry less, save more, and climb faster.
Dragon II Cams


A thumb press has two main benefits: it’s a simpler configuration than a thumb loop meaning less to get in the way of a good placement when you’re pumped or fumbling with thick gloves in winter, and it allows you to have an extendable sling built in to the cam whilst still achieving a high strength rating. DMM have CNC’d extra grip into the thumb presses to give it the best handling characteristics possible.
Dragon II Cams


An extendable Dyneema greatly increases the speed and ease of extending placements, decreases rope drag, and saves weight on your rack. If you need to extend the sling, simply unloop it when the cam is placed, and you have it extended. Not only does this decrease rope drag by allowing the rope to form a straighter line or smaller angles, it also means you need to carry less quickdraws. DMM’s compact stitching makes re-racking extended Dragons quick and easy, for a completely faster and lighter ascent.
Dragon II Cams


Cams with single stems are more forgiving in fall scenarios where the rock formation has prevented the cam from being placed in the direction of the load. Simply put, the Dragon’s firm but flexible stem allows for 360° flexibility, maximising your placement options, and allowing you to put cams where you normally wouldn’t trust them.
Gyro Twin
$135 USD 10 left
Figure 8
$18 USD 10 left
$34 USD 19 left
Locking Carabiners
$18 USD 2 left
$15 USD 2 left
Chalk Bags
$16 USD 2 left
$36 USD 0 left
$92 USD 10 left
$20 USD 1 left
$24 USD 1 left
$59 USD 1 left
$95 USD 4 left
Argon ice axe
$500 USD 6 left
Totem Cam
$69 USD 7 left